Skip to content

Firmware

NVR2X-S2_PldEng_P_General-03081-171013_PART_V3.205.000000E.0.T.20190201.zip

Eltrox firmware released Feb 1, 2019. May work with 2 devices, including N6.

Released
Feb 1, 2019
Version
V3.205.000000E.0.T
Size
70.7 KB
Hardware
2 devices

Download

Download firmware

Permanent copy on the Internet Archive (item page)

MD5
8cb46de7aadf91ede26725fa26275561
SHA-256
c8cdc6a846a9067a6047070e47987b52d452c712896fb92dd6aab717aba5db7f

Where it's published

Compatible hardware

Hardware IDs this firmware's installer accepts (2 devices). Names with placeholders such as x or XXX are board families.

Where these IDs come from
  • Install.lua in DH_NVR2X-S2-Custom_PldEng_P_General-03081-171013_PART_V3.205.000000E.0.T.20190201.bin: the installer script's board checks, 3 IDs

Technical details

Read from inside the firmware (zip archive).

Architecture
arm
Flash
16.0 MB
Image dates
Feb 1, 2019
Security
Signed, not encrypted
Flash layout: 8 partitions, 1 written by this firmware

From the recorder's Install.lua partition table.

PartitionStartEndSizeImageFilesystemBuilt
boot0xa00000000xa0050000320.0 KBnot written——
rootfs0xa00600000xa0ca000012.3 MBnot written——
Log0xa0ca00000xa0da00001.0 MBnot written——
web0xa0da00000xa0f400001.6 MBnot written——
custom0xa0f400000xa0f60000128.0 KBcustom-x.cramfs.imgcramfs2019-02-01
logo0xa0f600000xa0f80000128.0 KBnot written——
config0xa0f800000xa0fe0000384.0 KBnot written——
backup0xa0fe00000xa1000000128.0 KBnot written——

Also published as

Byte-for-byte identical files under other names:

Other files for much of the same hardware, from any vendor.