Skip to content

Firmware

General_TPC-NYX2200-MS-BTGW_V1.000.0000000.2.R.20220531.zip

Dahua firmware released Sep 22, 2022. May work with 11 devices, including TPC-AEBF5201-TB, TPC-AT2201-TB-WD, TPC-AT2201-TB-YZ.

Released
Sep 22, 2022
Version
V1.000.0000000.2.R
Size
567.9 KB
Hardware
11 devices

Download

Download firmware

Permanent copy on the Internet Archive (item page)

MD5
7b8b17aeac6e184fed2200b98bbda896
SHA-256
f774ca6747226b4750e9cb0293ada43c797887fa32aee089e445344eab1c832b

Where it's published

Compatible hardware

Hardware IDs this firmware's installer accepts (11 devices).

Where these IDs come from
  • Install in packetCamera_TPC-NYX2200-MS-BTGW_V1.000.0000000.2.R.20220531.bin: the installer's device list (board families), 4 IDs (not counted: a more specific list exists)
  • check.img in packetCamera_TPC-NYX2200-MS-BTGW_V1.000.0000000.2.R.20220531.bin: the device's own hardware check list, 11 IDs

Technical details

Read from inside the firmware (zip archive).

Architecture
arm
Image dates
May 31, 2022
Security
Signed, not encrypted, security baseline V2.0
Flash layout: 1 partition, 1 written by this firmware

From the image headers (only partitions this firmware writes).

PartitionStartEndSizeImageFilesystemBuilt
camera90x00x8000000128.0 MBcamera.img—2022-05-31

About the security baseline: firmware with a higher security baseline can stop a device going back to older firmware. A device already on a higher baseline than V2.0 may refuse this file, and after installing it you may not be able to downgrade to firmware with a lower baseline.

Other files for much of the same hardware, from any vendor.