Firmware
DH_IPC-DS21-Hertz2_Eng_N_NonCA_V1.000.0000000.9.R.230607.bin
Dahua firmware released Jun 7, 2023. May work with 2 devices, including IPC-WDS-S2-Cayenne, IPC-WDS-S2-USA.
- Released
- Jun 7, 2023
- Version
- V1.000.0000000.9.R
- Size
- 7.3 MB
- Hardware
- 2 devices
Download
Permanent copy on the Internet Archive (item page)
- MD5
db28e2719d1897250527b3c967548dba- SHA-256
886b24aae5aca7ece769762651a9ea906c35cae777082e71f585b4f19216d7d7
Where it's published
Available from
Dahua
Dahua
CurrentSold as
V1.000.0000000.9.R · Listed date Jun 7, 2023
Available from
Dahua
DahuaFileDirectory
CurrentV1.000.0000000.9.R · Listed date Jun 7, 2023
Compatible hardware
Hardware IDs this firmware's installer accepts (2 devices).
Where these IDs come from
- hwid: the device's own hardware check list, 2 IDs
- Install: the installer's device list (board families), 1 ID, vendor General (not counted: a more specific list exists)
- check.img: the device's own hardware check list, 2 IDs
Technical details
Read from inside the firmware (dahua package (zip variant)).
- SoC
- SigmaStar
- Architecture
- arm
- OEM build
- General
- Kernel
- Linux 4.9.84
- Flash
- 8.0 MB
- Image dates
- Jun 7, 2023
- Security
- Signed, not encrypted, security baseline V2.1
- Language & video
- English by default · NTSC
Flash layout: 6 partitions, 4 written by this firmware
From the firmware's partition table (partitionV2.txt).
| Partition | Start | End | Size | Image | Filesystem | Built |
|---|---|---|---|---|---|---|
| U-Boot | 0x0 | 0x30000 | 192.0 KB | dhboot.bin.img | — | 2023-06-07 |
| hwid | 0x30000 | 0x40000 | 64.0 KB | not written | — | — |
| partition(ro) | 0x40000 | 0x50000 | 64.0 KB | partition-x.cramfs.img | cramfs | 2023-06-07 |
| Kernel | 0x50000 | 0x190000 | 1.3 MB | kernel.img | — | 2023-06-07 |
| romfs(ro) | 0x190000 | 0x7b0000 | 6.1 MB | romfs-x.squashfs.img | squashfs | 2023-06-07 |
| config | 0x7b0000 | 0x800000 | 320.0 KB | not written | jffs2 | — |
About the security baseline: firmware with a higher security baseline can stop a device going back to older firmware. A device already on a higher baseline than V2.1 may refuse this file, and after installing it you may not be able to downgrade to firmware with a lower baseline.